Private Subnet
# clientu
user
11/28/2022, 4:10 PMPrivate Subnet
u
user
11/28/2022, 4:10 PMHaving issues using Egress setting to have nodes reach the local subnet of a specfic node.
u
user
11/28/2022, 4:11 PMWhen i add the ip addresses of the subnet and designate the interface, the nodes can no longer reach the egress node
u
user
11/28/2022, 4:11 PMthe node in question is pi4
u
user
11/28/2022, 4:12 PMso instead, i disbaled egress for that node (pi4) and just included the ips of my local subnet in the allowed ips for that node
u
user
11/28/2022, 4:13 PMlocal subnet 192.168.0.0/16
egress node 10.6.0.1
u
user
11/28/2022, 4:13 PMthis approach works fine, but now im having a new issue
u
user
11/28/2022, 4:15 PMi have another node (lxsrvr 10.6.0.5) in the same private subnet as node 10.6.0.1 and whenever lxsrvr is connected to my netmaker network, i cant ping it's private address at 192.168.100.49 which should be routed through pi4
b
bored-island-21407
11/29/2022, 11:07 AMAny node on a network can only have one and only one route to a a cidr
r
rich-gold-92226
11/29/2022, 2:19 PMRight, but the lxsrvr node's local ip (192.168.100.49) isn't listed under any other node but the pi4 node
rich-gold-92226
11/30/2022, 1:35 AMSolved it by removing the local address from the lxsrvr node. I was unaware that the node's private address outside the netmaker network was used for routing.